CowBoy OUTLAW Hand Operated Leather Sewing Machine

Watch video on youtube:

Click here for Demo video 1

Click here for Demo video 2

How to operate your Cowboy OUTLAW

How to thread your Cowboy OUTLAW

How to adjust thread tension

The Cowboy Outlaw is a handcranked (forward and backward), jump foot, needlefeed, leather sewing machine (it also sews nylon webbing and Bio-plastic). It has over 3/4 inch lift and sews over 5/8 inch thickness of real leather, with a maximum stitch length of about 3.3 stitches per inch. The bottom photo shows the Outlaw sewing 4 layers of 10oz (40 oz = 5/8") leather.

The Outlaw uses bonded nylon or polyester thread sizes from #69 through #346 thread (and possibly #415). It is made of cast iron and steel, with a 9 inch long x 3.15 inch wide arm (similar to the motorized CB3500) and uses the same needles (794S), shuttle race and large bobbins as the larger Cowboy Stitchers. It also takes the same roller edge guide as it's larger brothers.

This machine sews from one stitch at a time up to 100 per min. Built of solid cast-iron, instead of soft metal, it has all strong steel internal parts for years of trouble free sewing.

Weighing in at 50Lbs, the Outlaw is portable enough to take to leather shows, to use it for tack and saddle repairs. Plus, it's great for sewing gun belts, handgun holsters and knife sheaths too!

A full array of attachments are available for improving high productivity and perfect seam quality.

#CB01 Material Guide / Edge Guide: easy to make sure straight stitch.

#CB02 Special flat work table platform: allows the cylinder arm sewing surface to be converted to a flat sewing surface to allow for better stitching with certain types of work.

#CB03 Presser foot with right compensating guide: this spring loaded edge guide presser feet is used for creating an even stitch along the edge of the leather

#CB04 Left side presser foot: narrow toe foot that provides the most visibility around the presser foot and allows you to sew along the edge of your leather

#CB05 Piping cord presser foot: this piping foot has a very large groove under the foot allowing you to sew over beads up to 5 mm in size


Copyright 2006 rights reserved.